303.14701 - Sears/ Kenmore Central Humidifier
303.14701
Owners Manual
Selecting a LocationSelecting a Location
Consider these points as you choose the location for your humidifier.
Locate humidifier on supply air plenum (Fig. 1) or return air plenum. If the humidifier is installed on the return air plenum, the flexible hose, round opening, is connected to the supply air plenum.
If furnace is equipped with air conditioning, humidifier should be mounted above or at slope side of 'A' coil to avoid possible splashing (Fig. 2) of water in the reservoir.
Humidifier should be installed so that if the humidifier or any other connections should leak, the resulting flow of water will not cause damage. Under no conditions is Sears the manufacturer to be held liable for any water damage in connection with this humidifier. Never install humidifier in attic or crawl space where freezing may occur or leaking will cause water damage.
If holes between supply air plenum and return air plenum must be located more than 40 inches apart (Fig. 1), standard 6 inch round pipe and fittings (not supplied) may be used, or an 8 foot section of flexible tube no.28115205 may be purchased through the Sears parts department. Materials needed for this type of installation are available at Sears.
<- Understanding Humidity
