303.14701 - Sears/ Kenmore Central Humidifier

303.14701
Owners Manual
Installation

Installation

The humidifier is shipped with the block-off panel on the right side (Fig. 3). This is suitable for installation as shown in Fig. 1 above. If this is suitable for your installation, remove parts as shown under DISSASSEMBLY.

If you require the block-off panel on the left side (Fig. 4) start with DISSASSEMBLY then remove block-off panel from right flange and install with same screws on left flange.

FIBRE PLENUM DUCTS

NOTE: The mounting screws supplied are for standard installation on sheet metal plenum ducts.

If you have fibre plenum ducts, install the humidifier and components with thru-bolts, nuts and washers (not supplied). (This fibre duct installation hardware is not supplied and must be purchased from your local hardware store.

CAUTION: Safety glasses should be worn to prevent eye injury when installing humidifier.

 

<- Selecting a Location

Installation - Disassembly ->