INSTALLATION INSTRUCTIONS FOR HUNTER CEILING FANS TYPE 3
Step 10: Install Globe
A. Install the glass globe assembly to fixture fitter. See Figure 10.
Inside the top of the globe assembly locate the (3) plastic clips. See Figure 10A. The clips have a horizontal flange which is used to support the globe assembly during installation.
After you've located the (3) plastic clips inside the globe, locate the (3) matching clearance openings in the bottom of the fixture fitter. Lift the globe assembly and position the (3) plastic clips inside the clearance holes in the fitter. See Figure 10B.
NOTE: You can easily align the plastic clips with the clearance openings by looking through the space between the housing and globe assembly as you lift the globe assembly into position.
Lift the globe assembly until it.s free to rotate in either direction. Rotate the globe assembly until the (3) screw clearance holes in the globe trim line up with the matching threaded holes in the fixture fitter. See Figures 10 and 10C.
Secure the globe assembly to the fitter using (3) decorative screws found in sack parts. See Figure 10C. Tighten all (3) assembly screws.
CAUTION: Failure to securely tighten the (3) assembly screws could result in the globe assembly falling.
