INSTALLATION INSTRUCTIONS FOR HUNTER CEILING FANS TYPE 3
Step 9: Aligning the Fixture Fitter
A. Assemble the fixture fitter to the fitter mounting plate by inserting the upper plug connector through the hole in the center of the fitter and securing the fitter to the mounting plate using (3) 3/8" long phillips round head screws with lockwashers. Tighten the (3) screws securely. See Figure 9.
CAUTION: Failure to securely tighten the (3) assembly screws could result in the light kit falling.
B. Plug the upper and lower plug connectors together. Attach the light fixture to the fitter using (3) 3/8" long phillips round head screws with lockwashers. Tighten the (3) screws securely. See Figure 9A.
CAUTION: Failure to securely tighten the (3) assembly screws could result in the light fixture falling.
Install (2) lamps. Refer to maximum wattage label on the light fixture for maximum lamp wattage.
