INSTALLATION INSTRUCTIONS FOR HUNTER CEILING FANS TYPE 3

Step 4A. Assemble Top Housing

CAUTION: Do not lift motor by wires.

A. Assemble the housing to the hanger adapter using (3) #8-32 screws. See Figures 4C and 4D. First align the (3) raised tabs on the hanger adaptor with the (3) narrow notches in the top housing. Make certain the housing sits flat on top of the adaptor. Tighten the screws securely.

FIGURE 4C. Assemble Top Housing
FIGURE 4D. Assembling Top Housing

NOTE: Assembly Methods For Installer's Choice Hanging System

Your new Hunter fan can be hung in (2) different manners.

(1) as a low profile fan or

(2) as a ball type hanging fan.

Please read Steps 5 through 7 and decide which style mounting to use.