INSTALLATION INSTRUCTIONS FOR HUNTER CEILING FANS TYPE 3
Step 11: Operation of Remote Control Operating Instructions:
The hand-held transmitter has individual buttons for control of the light, for controlling the fan speeds, for turning the fan off, and for reversing. See Figure 11.
NOTE: Be sure to install a fresh battery. Check for weak battery if fan fails to operate properly.
Pressing the "LIGHT" button will turn the light on to full brightness. Holding the button will cause the light to dim slowly - release the button at the desired brightness to hold the selected brightness level. Pushing the button again will turn the light off.
The fan may be started by pressing one of the buttons marked "1,"
"2," or "3," for high, medium, or low,
respectively. Pressing the button marked "FAN" will
turn the fan off. The 
button
is for reversing. When this button is pushed the fan will reverse
its
direction of rotation.
Wall Mount: A holder is supplied with the transmitter which can be mounted to a convenient location on a wall. The holder will help prevent misplacement of your transmitter by providing a permanent receptacle. See Figure 11A.
If desired, the holder can be mounted directly over the wall switch.
