INSTALLATION INSTRUCTIONS FOR HUNTER CEILING FANS TYPE 3
Step 8: Fan Blade Assembly, Installation, and Balancing
A. First insert the rubber grommets into the (3) holes in each wood blade. See Figure 8.
B. Next assemble the wood blades to the sheet metal blade brackets and blade medallions using (3) shoulder screws for each blade. See Figure 8A. Make sure all screws are tight.
C. Attach each blade assembly to the blade mounting plate at the bottom of the fan using (2) #10-32 x 1/2" long phillips round head screws with lockwashers. See Figure 8B. Tighten the assembly screws securely. Repeat the step until all blades are securely attached.
D. A blade balancing kit has been provided with your fan. Should the fan wobble in operation, you may use the kit to correct the balance per the instructions supplied with the kit.
NOTE: After installing all the blades, check the (10) blade bracket assembly screws which attach the brackets to the motor. Make certain they are tight. See Figure 8B.
