Installation Instructions For Type 2 Hunter Ceiling Fan With Light
Step 6: Final Wiring
A. Connect electrical supply leads to the leads from the motor using approved connectors. Connect black electrical supply lead to the black motor lead and the black with white stripes motor lead (see Note). Connect the white electrical supply lead to the white motor lead. Connect the ground wire to the green leads from the motor and the ceiling plate. See Figure 9.
Note: If a separate wall switch will be used to control the light, connect the black wire with white stripes to the wall switch lead. The wall switch must be acceptable for use as a general-use switch.
Caution: No bare wire or wire strands should be visible after making connections.
B. After making the wire connections, the wires should be spread apart with the white and green wires on one side of the outlet box, and the black and black/white wires on the other side of the box. The splices should be turned upward and pushed carefully up into the outlet box.
