A. Install light bulb, using guide inside light kit for max size & type of lamp. Thread the three (3) #8-32 knurled head screws halfway into the three (3) threaded holes in the side of the light housing. Secure the glass globe to the light housing by carefully tightening the three (3) screws.

Note: Should globe emit any sound when fan is running, readjust three (3) globe mounting screws until sound has disappeared.

B. If your fan comes with a decorative trim band, peel the backing from the trim and place it in the groove in the bottom of the light kit using the photograph shown on the carton as a guide.