Hunter Fan Company Integrated Remote Control Instruction Supplement
Operating The Remote Control
The hand-held transmitter has individual buttons for control of the light, for controlling the fan speeds, for turning the fan off, and for reversing. See Figure 5.
Pressing the "LIGHT" button will turn the light on to full brightness. Holding the button will cause the light to dim slowly-release the button at the desired brightness to hold the selected brightness level. Pushing the button again will turn the light off.
The fan may be started by pressing the HIGH, MEDIUM, or LOW speed buttons. For best operation, allow the fan to start on HIGH, then select the desired speed. Press the fan OFF button to turn the ceiling fan off. Press the REVERSE button to change the fan's direction while the fan is running.
NOTE: Replace 12-volt battery with type 23 A, MN-21 or equivalent.
You have completed the installation of the integrated remote control. Refer back to the "Installing Light Fixture" section in the Installation / Owner's Manual provided with your Hunter fan for proper instructions.
