Hunter Fan Company Integrated Remote Control Instruction Supplement

Assembling The Switch Housing

Assemble the lower switch housing to the upper housing. See Figure 3.

First insert the plug from the upper housing into the plug receptacle in the receiver module.

NOTE: The plug is polarized and will only go together one way. Make sure you have correctly aligned plug and receptacle.

Next, line up the lower switch housing with the upper housing and assemble together with the (3) screws and lockwashers provided. See Figure 3.

If the two pieces are difficult to assemble, check the alignment of the (3) slots in the top of the receiver module and the mounting holes in the lower switch housing. They should align together.

Tighten the (3) assembly screws.

CAUTION: Make sure the screws are snug, otherwise the assembly could separate during operation.