Hunter Fan Company Remote Ceiling Fan & Light Control
Operation:
1. Turn ON the wall switch, the light will turn ON at maximum brightness and the fan will be off.
2. Standby Mode:
-
To save battery power, if no button on the remote is pressed for one minute, the remote LCD will go into standby mode.
-
During standby mode, all LCD icons are turned OFF.
-
The LCD will resume original display when any button is pressed. The button function is not performed but acts as a wake up key.
3. Light Operation:
-
ON and OFF: Press and quickly release the light button on the hand-held remote to turn the light OFF and ON.
-
Dimmer: Press and hold
the light button for more
than one second to dim or brighten the light. If
brightness is initially at 100%, then the brightness will
decrease to 95% and so forth by 5% increments as
long as the light button is pressed. When the minimum
brightness of 25% is reached, the setting will pause
and then begin to increase by 5% increments as long
as the light button is pressed. -
Auto Resume: The light button has an auto resume, so the brightness will stay the same as the last time it was turned OFF.
4. Fan Operation:
-
ON, OFF, and Speed
Setting: Press the fan
button to turn ON the ceiling
fan at HIGH speed. Press
again to change the speed
to MEDIUM, then again to
LOW, and then again to turn
the fan OFF.
5. Low Battery Detection:
-
The low-battery warning
icon will flash when the
battery needs to be
changed. If there is a lowbattery,
it will also flash
during standby mode. -
Replace the battery when the low-battery warning icon begins to flash.
