Installation for Remote Ceiling Fan ® & Light Control
Operation:
1. Turn ON wall switch, the light will turn ON at maximum brightness.
2. Light Operation:
-
Press and quickly release the light button on the hand held remote to turn the light OFF or ON. (Light will come ON at maximum brightness.)
-
Press and hold the light button for more than 1 second to turn the light ON and decrease from maximum brightness to OFF.
-
Release the light button when the desired light level is reached.
-
Continue to hold the light button to repeat the cycle. (Maximum -light level decrease-OFF)
-
While the light is ON, holding the light button will decrease the light brightness.
-
Turning the light OFF resets the dimming function. The next press of the light button will start at maximum brightness.
3. Fan Operation:
-
Press the High, Medium, or Low speed buttons to turn the ceiling fan ON at the desired speed. Press the fan OFF key to turn the ceiling fan OFF.
-
For best fan operation: Allow the ceiling fan motor to start on High, then select the desired speed.
4. Manual Light Switch Operation:
To turn the lights ON without the transmitter, turn OFF the wall switch for 5 seconds, then turn the wall switch back ON. The light will turn ON at maximum brightness, and the fan will be OFF.
For everyday operation, leave the wall switch ON. However, if the control will not be used for an extended period of time (5 days or more), turn the wall switch OFF.
