INSTALLATION INSTRUCTIONS FOR OUTDOOR USE HUNTER CEILING FANS USING INSTALLER'S CHOICE MOUNTINGS
Step 9: Assemble Upper Switch Housing
First remove and save the (3) screws and lockwashers from the mounting plate located at the end of the motor shaft. Feed the upper plug connector through the hole in the center of the upper switch housing making sure you do not damage the wires. Assemble the upper switch housing to the mounting plate using the (3) screws and lockwashers which you removed from the mounting plate. Tighten the screws very securely. See Figure 10.
CAUTION: Failure to properly tighten the (3) upper switch housing assembly screws could result in the switch housing falling.
