INSTALLATION INSTRUCTIONS FOR HUNTER ORIGINAL® CEILING FANS
Step 8: Operation of Your Hunter Fan
1. The operation of your fan is controlled with a pull-chain switch, which has four (4) positions: Off -- High -- Medium -- Low. Pull the chain gently to obtain the speed you desire.
2. The Break-A-Way Connector is designed to separate from the chain at a predetermined force. If this separation occurs, simply reinsert the connector. It can be used again and again. See Figure 16.
3. Reversing your fan is controlled by a small switch located on the switch housing. See Figure 17.
NOTE: Ceiling fans are usually adjusted once in the fall and again in the spring to blow upward in the winter and downward in the summer. You may run them in either direction at anytime, however, as you prefer. Experiment as you like to obtain maximum comfort from your fan.
