INSTALLATION INSTRUCTIONS FOR HUNTER LOW PROFILE CEILING FANS
Step 10: Operation of Fan
A. Turn electrical service on at main panel.
B. Switch operates in this sequence: "High," "Medium," "Low," "Off." Pull chain slowly to operate. Also, release the chain slowly so as to prevent chain from flying up into blades, possibly resulting in damage to blades, or pull chain. The breakaway connector is designed to separate from the chain at a predetermined force. If this separation occurs, simply reinsert the connector. It can be reused again and again. See Figure 8.
C. Motor is electrically reversible. When first operating fan, determine direction of air flow. If you wish to change direction, switch fan off and allow to stop. Slide reversing switch to the opposite position and switch fan back on. See Figure 8.
Speed Control
As an option, a wall mounted speed control switch is available from your Hunter dealer.
