INSTALLING LIGHT FIXTURE

Introduction and Safety Instructions:

Your fan may include a light fixture. Information for wiring and installing all included Hunter light fixtures follows.

Note: If you purchased a fan without a light fixture, you may purchase an accessory light kit separately. For best performance and beauty, use only Hunter-brand light kits, Type AZ. Hunter light kits are designed, tested, and UL approved for all Hunter fans, and are available at most Hunter dealers.

To install the light kit, follow the instructions included with the kit. If you are not installing a light fixture, turn to OPERATING YOUR HUNTER FAN for additional instructions.

WARNING

• To avoid possible electrical shock, before installing light fixtures, disconnect power by turning off the circuit breakers both to the outlet box and to its associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.
• Connect house wiring to the fan before attaching the light fixture to the fan.
• All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70-1993. If you are unfamiliar with wiring, you should use a qualified electrician.