Installation and Operation Manual for Installers Choice® Ceiling Fans

STEP 9 - INSTALLING LIGHT FIXTURE

Your Hunter fan may include an integrated light fixture. If you are not installing a light fixture, turn directly to OPERATING YOUR HUNTER FAN for additional instructions.

Information for wiring and installing all included Hunter light fixtures are included in the following section "Attaching Light Fitter to Switch Housing," .

ATTACHING LIGHT FITTER TO SWITCH HOUSING

Note: Refer to Figures 9a and 9b for the steps below.

1. Remove the switch housing cover from the switch housing by removing the three #6-32 housing assembly screws from the sides of the switch housing. See Figure 9b.

Note: Do not discard the screws or cap. You will need the screws later in the installation. You will need the cap if you remove the light fixture in the future.