Home > Help Center > Ceiling Fan Information > Manuals > Installation Instructions for Installers Choice® Ceiling Fans > Introduction and Safety Instructions  

Installation and Operation Manual for Installers Choice® Ceiling Fans

Your new Hunter ceiling fan is an addition to your home or office that will provide comfort and performance for many years. This manual gives you complete instructions for installing and operating your fan. We are proud of our work. We appreciate the opportunity to supply you with the best ceiling fan available anywhere in the world.

Before installing your fan, record the following information for your records and warranty assistance. Please refer to the carton and the Hunter nameplate (located on top outside fan motor housing) for the proper information.

Model Name __________________ Catalog No. ___________________

Serial No. _____________________ Date Purchased ________________

Where Purchased ______________ _____________________________

IMPORTANT INFORMATION

CAUTIONS

  • Read entire booklet carefully before beginning installation and save these instructions.
  • To reduce the risk of personal injury, attach the fan directly to the support structure of the building according to these instructions, and use only the hardware supplied.

WARNINGS

  • To avoid possible electrical shock, before installing your fan, disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. If you cannot lock the circuit breakers in the off position, securely fasten a prominent warning device, such as a tag, to the service panel.
  • All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, you should use a qualified electrician.
  • To reduce the risk of personal injury, do not bend the blade attachment system when installing, balancing, or cleaning the fan. Never insert foreign objects between rotating fan blades.
  • To reduce the risk of fire, electrical shock, or motor damage, do not use a solid-state speed control with this fan.

DO YOU NEED HELP?

To install a ceiling fan, be sure you can do the following:

  • Locate ceiling joist or other suitable support in ceiling.
  • Drill holes for and install wood screws.
  • Identify and connect electrical wires.
  • Lift 40 pounds.

If you need help installing the fan, your fan dealer can direct you to a licensed installer or electrician.