Hunter Air Purifier - HEPAtechT 30375 Users Manual

Air Purifier Features

Model 30375 and Model 30380 Electronic Key Pad Control

1. On/Speed Control: Press this button to turn the unit 'on'. When you press it once, the unit will be on low speed. Keep pressing the button to change speeds until you reach the speed you desire.
2. Automatic Shut-off: If you desire the air purifier to shut off automatically, you can set the timer. Press the timer button to choose the amount of time you would like the air purifier to run (1, 2, 4, or 8 hours). Press the button repeatedly to change the length of time.
3. Ionizer: Press this button to turn 'on' the ionizer. When the ionizer is 'on', the green light to the left of the button will be illuminated.
4. Check Filter: When the check filter light is illuminated, you should open the front grill and compare the filter to the check filter chart. If the filter is dark, you should replace the filter.
5. Reset: When you change the filter, press the reset button. Use the tip of a pen or pencil to press the reset button.

Models 30200, 30250 and 37255

1. On/Speed Control: Rotate this knob to turn the unit 'on'. The knob rotates through "Off ", "Low", "Medium" and "High". Keep rotating the knob to change speeds until you reach the speed you desire. When the power is "on", the red light will be illuminated.
2. Ionizer: Press this button to turn 'on' the ionizer. When the ionizer is 'on', the green light near the button will be illuminated.

AIR PURIFIER PARTS

Using Your Air Purifier

1. Remove your air purifier from the box and take it out of the clear plastic protective bag.
2. Place your HEPAtechT Air Purification System on a firm, flat surface.
3. Before turning the Air Purifier 'on', you need to open the front grill. To release the front grill, place your fingers behind the tabs and pull forward.
4. The filter will be installed in the correct position. Grasp the filter and pull it forward. Remove the plastic wrapping and replace the filter in the unit. The white filter material should be facing outward (towards you) and the black carbon material should be hidden from view (inside the unit).
5. Replace the front grill. Be sure that the bottom tabs are in location first, and then push the top of the grill forward until it is closed. The unit is now ready for normal operation.
   
   NOTE: This unit will not operate unless the door is placed in the correct position.
   
6. Plug the unit into a 120V electrical outlet.

Cleaning And Filter Replacement

(Models 30380, 30375, 37255, 30250 and 30200 use Replacement Filter 30930.)

1. Clean the outside of the unit with a soft, damp cloth. The front grill can be removed and cleaned in soapy water.
2. When you remove the front grill to clean it, you should also remove the pre-filter from the front grill and gently wash it in soapy water. Washing the pre-filter can help extend the life of your HEPAtechT Filter. Be sure that all parts are completely dry before you reassemble them to the Air Purifier.
3. Every few weeks, you should open the front grill and view the condition of the HEPAtechT Filter. Compare the filter to the color coded chart that is on the inside of the housing. If the filter matches the dark color on the chart, you should remove the filter and replace it with a new filter. Be sure to remove any plastic wrapping that may be on the new filter before you place it into the Air Purifier.

Mounting the Air Purifier to the Wall

(For Models 30200, 30250 and 37255)

Your air purifier has keyhole slots on the back which can be used to mount your air purifier to the wall. To mount your air purifier to the wall, use plastic dry wall type anchors #14-16 and 1/4" lag screws 11/2" long, or equivalent. While your unit is designed to accommodate wall mounting, the optimum performance will be achieved when the unit is placed on the floor, 6 inches away from the walls.

Replacement Filters: To obtain a replacement filter for your Air Purifier, call 1-800-4Hunter for your nearest retailer or Hunter Customer Service at 901-248-2222. Please be prepared to tell the operator the model number of your Air Purifier and the model number of the filter you need to replace. Models 30380, 30375, 37255, 30250 and 30200 use Model 30930 Replacement Filters.

How The HEPAtechT System Works

The above is an illustration of how the HEPAtechT air purification systems work. Dust and other irritants are pulled into the air purification system and cleaned through the HEPAtechT Filter. Clean, purified air is released into the room.

 

<- Introduction

Warranty ->