Hunter Air Purifier - QuietFlo 30170 Users Manual

Troubleshooting

Problem
Solutions
1. No Display
  • Confirm that the unit is plugged in.
  • Check the installation of the front grill.
  • Reset the air purifier. (See Resetting the Air Purifier on pg. 17.)
2. Display reads “door.”
  • The front grill is not attached properly. Remove grill from unit and re-attach. (See Initial Operation on pg. 6.)
3. Program number is flashing.
  • Unit is in temporary program override mode. Refer to Override of Auto Mode on pg. 10.
4. Programs are not running.
  • Confirm that the unit is in Auto Mode. The Auto indicator should be lit and a program number should be illuminated. (See Auto Mode on pg. 9.)
  • Review program settings to confirm program set points. (See Reviewing Programs on pg. 16 for additional information.)
5. Time is not correct
  • Check that the proper display is chosen. (See Display Modes on pg. 8).
  • Set the time. (See Setting the Day/Time on pg. 12.)
6. Keypad does not work or display reads “Lock.”
  • Key pad has been locked to prevent accidental changes to the programs. (See Keypad Lock on pg. 16 to unlock the key pad.)
7. Erratic Display or Operation.
  • Reset the air purifier. (See Resetting the Air Purifier on pg. 17.)
8. Filter and/or Pre-filter Indicator is Flashing.
  • The Filter and/or Pre-Filter Counters have reached the estimated usage times. Check and replace filters if needed. (Refer to Filter and Pre-Filter Counters on pg. 11.)
9. Unit has reduced air flow or increased noise.
  • The filter is clogged and should be changed. (Refer to Changing the Filter on pg. 19.)

 

Technical Support
If you have any additional questions or problems with your Hunter air purifier, please call 1- 888-830-1326 from 8:00 am to 5:00 pm Central Time or contact us over the Internet at www.HunterFan.com.

 

<- Maintenance